Garmin GPSMAP 196 - Manual (Page 49)

Active Route Page Options
Press MENU while on the Active Route Page to open the options
menu. You can edit the route using many of the options in the menu
such as Edit on Map (see page 65 for information), Add Waypoint,
and Invert. You can also change the data fields to suit your needs.
You can also select an approach for your landing and set your fuel
flow (or plan your route, based on your current Usage Mode):
Select Approach—(Aviation Only) allows you to select the
final course segment of a published approach, replacing the final
destination airport in a Goto or route with the sequence of waypoints
for the selected approach. The approaches provide only the final
course segment, usually from final approach fix (FAF) to missed
approach point (MAP), and are based on existing GPS, RNAV,
VOR, NDB, localizer, or ILS approach procedures. All approach
procedures are flown as a sequence of waypoints in the route. To
select an approach and add the waypoints to the route, the final
destination in the Goto or route must be an airport with a published
approach.
Set Fuel Flow (Plan Route)—allows you to enter information about
your aircraft and route.
Position Data Page
The Position Data Page provides a quick reference for the important
data you want to show while navigating a route in Aviation and
Water Modes. The default page shows a compass ribbon, your
current latitude and longitude, the current date and time, battery or
external power indicator, and eight user-selectable data fields. The
compass ribbon is shown at the top of the page to show your current
heading with a dark, vertical bar. To stay on course, steer toward the
gray bar (or arrows) until it is aligned with the dark bar.
Press PAGE repeatedly to open the Position Data Page.
Position Data Page
GPSMAP 196 Pilot’s Guide 41
A
VIATION
M
ODE
P
AGES
> P
OSITION
D
ATA
P
AGE