Garmin nuvi 1490TV - Manual (Page 11)

nüvi 1490TV Series Quick Start Manual 11
Touch and to select a
channel.
Touch and to adjust the
volume.
Touch on the map to return to
the TV menu.
Touch
Quit to stop receiving a TV
signal.
TV signal strength and system
messages are displayed in the status
bar in the upper-left corner of the
screen.
Using a reverse Camera
If a reverse camera has been installed
in your vehicle, you can view the
output of the camera on your nüvi
1490TV.
1. Connect the camera to your nüvi
through the video-in connector on
the left side of the nüvi. See page
2 .
•
•
•
•
2. Touch TV .
3. If necessary, follow the on-screen
instructions.
Securing Your nüvi
1. Ensure that you are at your
security location and that your nüvi
is receiving satellite signals.
2. Touch Tools > Settings >
Security .
3. Touch the button below garmin
Lock .
4. Enter a four-digit PIN.
5. Touch
Set .
NOTE: If you forget your PIN and
your security location, you must
send your nüvi to Garmin to get
it unlocked. You must also send a
valid product registration or proof of
purchase.