Step 3: install the battery, Step 4: mount the nüvi – Garmin nuvi 900T User Manual
Page 9
nüvi 900 Series Owner’s Manual
Getting Started
Step 3: Install the Battery
Warning: This product contains a lithium-
ion battery. To prevent damage, remove the
unit from the vehicle or store it out of direct
sunlight.
1. Locate the rectangular lithium-ion
battery included in the product box.
2. Locate the metal contacts on the end
of the lithium-ion battery.
3. Insert the battery so that the metal
contacts on the battery match up with
the metal contacts inside the battery
compartment.
Metal contacts
Battery
4. Press the battery down into place.
5. Slide the battery cover back on until it
clicks into place.
Step 4: Mount the nüvi
1. Clean and dry your windshield with
a lint-free cloth. Remove the clear
plastic from the suction cup, and
clean it with a lint-free cloth.
2. Plug the vehicle power cable (with
integrated traffic receiver) into the
power connector on the cradle.
Cradle
Power cable
3. Snap the cradle onto the suction cup
arm.
Suction cup
mount