Garmin nuvi 465TF - Manual (Page 4)

4 nüvi465quickstartmanual
Mount Your nüvi
1. Plug the vehicle power cable into the
back of your nüvi.
2. Fit the bottom of your nüvi into the
cradle.
3. Tilt your nüvi back until it snaps into
place.
4. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle. Your unit should turn on
automatically if it is plugged in and the
vehicle is running.
5. If you are using a traffic receiver in
Europe, connect the external antenna
to the traffic receiver and secure the
external antenna to the windshield
using the suction cups.
Enter Your Truck Profile
1. Turn on your nüvi.
2. Touch
Verify Truck Settings > New .
3. Touch the button in each category to
enter information.
4. Touch Save .
5. Enter the name for the profile, and
touch Done .
When you create a route, your nüvi
customizes the route to meet the
restrictions of your truck profile.
It is your responsibility to account for your
vehicle’s height, length, weight, and other relevant
restrictions when driving. Always defer to all
posted road signs and road conditions when making
driving decisions.
Acquire Satellites
Go outdoors to an open area, away from
tall buildings and trees.
Acquiring satellite signals can take a few
minutes. The bars indicate satellite
strength. When at least one of the bars
is green, your nüvi has acquired satellite
signals.
Find Points of Interest
1. Touch Where To? > Points of
Interest .
2. Select a category and a subcategory.
3. Select a destination, and touch
Go! .