Garmin nuvi 3790T - Manual (Page 9)

nüvi 3700 Series Owner’s Manual 3
Getting Started
Configuring The Device
1. Plug the vehicle power cable into
the mount.
2. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
The device should turn on
automatically if it is plugged in
and the vehicle is running.
3. Follow the on-screen instructions.
4. If you are using a traffic receiver
in Europe, connect the external
antenna to the traffic receiver and
secure it to the windshield using
the suction cups.
Front Cover
micro-B connector
Power key
Speaker
(on back cover)
Microphone
Memory card
slot
Turning the Device On and
Off
Press and hold the Power key.
Resetting Your Device
You can reset your device if it stops
functioning.
Press and hold the Power key for
10 seconds.