Garmin GPSMAP 76 - Manual (Page 72)

66 GPSMAP 76 Owner’s Manual
A
ppendIx
> M
essAGes
Messages
Approaching Turn—is displayed when you are
nearing a turn in a route.
Arriving at Destination—is displayed when you are
nearing your destination.
Batteries Low—when displayed you have less than 10
minutes of battery left.
Can’t Unlock Maps—No applicable unlock code for
one or more maps was found.
Cannot display all found, use city or postal code—
The unit found too many items to display. Narrow the
search using the city or postal code.
Database Error—Internal problem with the unit.
Contact your dealer or Garmin Product Support to have
the unit repaired.
Deep Water—The water is deeper than the amount set
in the Deep Water Alarm.
Dragging Anchor—The distance set in the Anchor
Alarm is exceeded.
Lost Satellite Reception—The unit is unable to
continue receiving satellite signals.
Memory Full—Unit memory is full, no further data
can be saved.
Near Proximity Point—You have reached the distance
set for a proximity waypoint.
No Diff GPS Location—RTCM is selected but no
DGPS data is being received.
No Tide Stations for that Area—No tide stations
within 100 miles of the area.
None Found—No data matched the search criteria.
Off Course—You are off course the distance set in the
“Off Course” Alarm.
Proximity Memory Full—No additional proximity
waypoints can be saved.
Proximity Radius Overlaps—The radius of two
proximity waypoints overlap.
Route Already Exists—You have entered a route
name that already exists.