Garmin GPSMAP 76CSx - Manual (Page 39)

GPSMAP 76CSx Owner’s Manual 
M
aIn
p
aGeS
Sight ‘N Go Navigation
To use Sight ‘N Go to navigate:
1. Press MENU> Sight ‘N Go to start the feature.
The compass ring with pointer is in-line with the
sighting mark on the case.
2. Hold the unit at eye level and line up the two
sighting marks with the distant object.
Sighting Page
3. Select Set Course.
4. Begin traveling to your destination on a course
line using the course pointer as a guide.
OR
Select
Project Waypoint.
5. Enter an estimated distance from your current
location to establish a projected waypoint
location.
6. Select Go To to open the Map page and begin
navigation to the projected waypoint. The
Compass page shows a bearing pointer for
guidance.
Using the Course Pointer or Bearing
Pointer
The bearing pointer and course pointer are
independent of each other. The bearing pointer
indicates the direction to your destination, and the
course pointer indicates your relationship to a course
line leading to the destination.
If the bearing pointer arrow is pointing straight
up, for example, you are going directly to your
destination. If it points any direction other than up,
turn toward that direction until the arrow is pointing
up and then continue in that direction. The bearing
pointer points to the destination.