Product status, Diagnostics, Activation – Garmin MX20 User Manual

Page 94: Product status diagnostics activation, Detailed operation

Advertising
background image



Detailed Operation

Product Status

The Product Status page displays a list of all products supported by the MX20. The status is shown as available
or not available. Available means the product is a part of your chosen subscription level and the MX20 has
data that can be displayed. A time stamp will indicate the last received product time, which is the time the
product was generated for transmission. Not Available means the product is not included in your chosen
subscription level or that data has not been received since the last power cycle of the MX20.

Diagnostics

The Diagnostics page shows error status codes generated by the XM radio receivers. One receiver is for weather
data and the other receiver is for audio entertainment. Signal strength is shown as one of four levels. The GDL
69/69A software version is shown in the lower left section of the display.

. Whle n the Status page, press Menu/Enter.
. Press the Products menu tem key to toggle to the Dagnostcs dsplay. The Dagnostcs page

nformaton s dsplayed.

. Press the Start Diag menu tem key to actvate GDL /A dagnostcs.

Note: After diagnostics have been run, power to the GDL 69/69A must be recycled to return to

proper operation, for GDL 69/69A software versions prior to version 2.13.

Activation

The Activation page shows the radio identification numbers for one or both receivers. These numbers are
needed to start a subscription. The Service Class is the name of the data subscription level. The Weather Prod-
ucts section shows the products contained in the selected subscription level.

. Press the FN key and then the FIS functon key when dsplayed.
. Press the fourth functon smart key on the rght to select the Status (Status) sub-functon.
. Press Menu/Enter to dsplay the Products menu tem.
. Press the Products menu tem smart key to toggle to the Dagnostcs dsplay. The Dagnostcs page

nformaton s dsplayed, ncludng Rado IDs, Servce Class, and Weather Products.

. Follow the XM Satellte Rado Actvaton procedure and press Accept at the approprate tme.

GDL 69/69A - FIS

XM FIS Product Status

XM FIS Diagnostics

Advertising