Garmin Geko 101 - Manual (Page 9)

3
Main Pages
All of the information needed to operate the Geko 101 is found on four main ‘pages’ (or
display screens). These pages are the Satellite, Map, Navigation, and Menu.
Simply press the PAGE button to switch between pages.
Satellite Page Basics
The Satellite Page shows the Geko 101 gathering all the necessary satellite information
in order to work. The Satellite Page shows you (in animation), the satellites, satellite signal
strength, and the Geko 101’s estimated location accuracy.
When you see the “READY TO NAVIGATE” message on the Satellite Page, the Geko
101 has found your location and you are ready to go!
NOTE: When you use the Geko 101 for the fi rst time, allow time for it to
track satellites by leaving the Geko 101 outside with a clear view of the sky
for 15-30 minutes.
)
Satellite Page
Location Accuracy
(estimated)
Satellites
Satellite Signal
Strength Bars
The “READY TO
NAVIGATE” message
must appear before you
can begin using your Geko
101 to navigate.
Main and Satellite Page Basics
Main Pages
Status Message
Satellite Menu Map Navigation
The ‘3D’ shows when receiving signals
from four or more satellites.
190-00297-00_0C.indd 3 10/1/2003, 12:59:05 PM