Garmin zumo 665LM - Manual (Page 3)

zūmo 665 Quick Start Manual 
installing the Battery
 Warning
This product contains a lithium-ion battery.
To prevent damage or personal injury,
remove the unit from the vehicle when
exiting or store it out of direct sunlight.
1. Locate the lithium‑ion battery that came in
the product box.
2. Slide the release key until the battery
cover on the back of the zūmo pops up.
3. Locate the metal contacts on the end of
the lithium‑ion battery.
4. Insert the battery so that the metal
contacts on the battery match with
the metal contacts inside the battery
compartment.
5. Replace battery cover.
Ways to Charge Your zūmo
Battery
NOTICE
Always keep the battery installed when the
zūmo is on.
Use the automotive power cable.
Use the USB cable.
Use an optional AC adapter cable.
Use an optional battery charger
Configuring Your zūmo
To turn on your zūmo, press the Power
button. Follow the on-screen instructions.
acquiring Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the zūmo.
Acquiring satellite signals may take a few
minutes. The bars indicate GPS
satellite strength. When one bar is green, the
zūmo has acquired satellite signals. Now you
can select a destination and navigate to it.
•
•
•
•
Using the Menu Page
➊ ➋ ➌ ➍
➏
➒ ➑
➐
➎
➓
➊ GPS satellite strength.
➋ Bluetooth ® technology status.
➌ Touch to select motorcycle, scooter,
automobile, off road, pedestrian mode.
➍ Battery status.
➎ Current time. Touch to change settings.
➏ Touch to find a destination.
➐ Touch to view the map.
➑ Touch to make a call when connected to
a compatible mobile phone .
➒ Touch to adjust the volume.
➓ Touch to use the tools such as settings,
Where Am I?, Help, and routes.