Garmin GPS III Plus - Manual (Page 76)

Delete All— allows you to remove all routes from memory. The waypoints con-
tained in all stored routes will remain in memory, but not as part of any route.
To delete all routes from memory:
1. Highlight ‘Delete All’ and press ENTER. A confirmation page will appear.
2. Press ENTER to delete all routes (or QUIT to cancel).
Active Route Page
The last page appearing in the main sequence (using the PAGE or QUIT keys)
is the Active Route Page. Whenever you have activated a route, GOTO, MOB or
TracBack, the Active Route Page will show each waypoint (by name) of the active
route, along with the desired course, distance to waypoint, time to each waypoint,
fuel requirements or sunrise/sunset times at each route waypoint. As you navigate
the route, the information on the Active Route Page will automatically update
to indicate the destination waypoint and any remaining interim waypoints—with
the next point along the route denoted by an arrow on the left-hand side of
the screen.
From the Active Route Page you can change the name of the active route
(see page 62), review information on a route waypoint (see page 47) or bypass
route waypoints and GOTO any waypoint in the route (see page 56). The user-
selectable data field on the right side of the page also keeps you informed of
current conditions. There are ten different data items available. See page 95 for
data type descriptions.
To change the Active Route Page data, press the LEFT/RIGHT keys on
the rocker keypad.
The Active Route Page shows
the route currently being used
for navigation guidance. The
next waypoint in the route is
denoted by an arrow on the
left-hand side of the screen.
Selecting a GOTO destination
along the current route will
take you directly to that
waypoint, then continue with
the remainder of the route.
66
REFERENCE
Route Options / Active Route