Garmin GPS 92 - Manual (Page 36)

GOTO Function
The GPS 92’s GOTO function lets you choose any
stored waypoint as a destination and quickly set a course
from your present position. Once a GOTO has been acti-
vated, the navigation page will provide you with steering
guidance to your destination.
To activate the GOTO function:
1. Press
G
.
2. The GOTO page will appear with the waypoint field
ready to select a destination. Enter the identifier of the
destination waypoint using the arrow keypad.
3. Press
E
to confirm the waypoint and display the
navigation page.
You can also quickly activate the GOTO function
from any other page by simply highlighting an identifier,
pressing the
G
key and confirming the GOTO page.
This method can be used to re-center the CDI on the des-
tination waypoint, or to manually “skip ahead” to a dif-
ferent route waypoint (and resume the remainder of the
route in sequence).
Once a GOTO is activated, the GPS 92 will provide
navigation guidance to the selected waypoint until the
GOTO is cancelled.
To cancel an active GOTO:
1. Press
G
.
2. Use the left arrow key to clear the field.
3. Press
E
to complete the cancellation.
To cancel GOTO naviga-
tion, use the LEFT ARROW
key to clear the identifier
field, and press ENTER.
Waypoint Name
Field
GOTO Options
You may access the nearest
waypoints page from the
GOTO page by pressing the
GOTO key a second time.
GOTO Key
Reference
30
92 manual 4/15/98 3:48 PM Page 30