Using fm traffic, Led blink codes, Fm t – Garmin nuvi 780 User Manual

Page 38

Advertising
background image



nüvi 700 Series Owner’s Manual

U

SinG

fM t

raffic

U

sinG

fM T

raffic

The traffic receiver is included in some

nüvi 710, 750T, 760, and 770 packages.
Use an FM TMC (Traffic Message

Channel) traffic receiver to receive

traffic information broadcast over the

FM Radio Data System. For information

about FM traffic receivers and coverage

areas, see

www.garmin.com/traffic

.

noTe: Garmin is not responsible

for the accuracy of the traffic

information. The FM traffic

receiver simply receives signals

from the traffic service provider

and shows that information on

your nüvi.

noTe: The FM traffic receiver

and nüvi must be in data range of

an FM station transmitting TMC

data to receive traffic information.

noTe: You can only access the

traffic information if the nüvi

is connected to an FM traffic

receiver.

To power

connector on

nüvi cradle

To power outlet

in vehicle

Power

LED

Status

LED

noTe: If your FM TMC traffic

receiver has an antenna with

suction cups on it, route the

antenna on your windshield

vertically using the suction cups.

LED Blink Codes

The green Power LED lights when

connected to external power. The Status

LED indicates the signal reception:

Yellow dot-dash flashes:

determining which country you

are currently in.

Advertising