Garmin GPS 155XL TSO - Manual (Page 94)

If you’re not authorized to fly direct-to the missed approach holding point:
1. After the MAP has been crossed, press the
D
key. The GPS 155XL will automatically
display the first waypoint of the missed approach procedure as the next approach waypoint.
2. Press E to confirm the destination.
3. Stop automatic waypoint sequencing by setting the GPS SEQ switch to the HOLD position.
4. Fly the missed approach procedure. Remember to select the desired inbound course to the
missed approach holding point before setting the GPS SEQ switch to the AUTO position.
5. Set the GPS SEQ switch to the AUTO position for navigation to the missed approach
holding point.
After a missed approach, the GPS 155XL will allow you to repeat the same
approach procedure and select the approach waypoint to which you have been
cleared as the next active to waypoint. Before reactivating the approach, make sure
you fly all published missed approach procedures.
To reactivate the same approach for another attempt:
1. Press the R key and rotate O to select the active route page.
2. Press
C
and rotate
O
to place the cursor over the identifier of the approach waypoint
to which you have been given clearance.
3. Press the
D
key, followed by
E
. The GPS 155XL will provide navigation for the
repeat approach, starting with the approach waypoint you have selected.
84
SECTION
5
APPROACH NAV
Missed Approach
Confirm the starting waypoint for the next
attempt by pressing
E.
Select the waypoint to which you have been given
clearance on the active route page and press
D.
155xlb manual 1/12/99 4:06 PM Page 84