Garmin GPSMAP 76S - Manual (Page 13)

12
Press the ROCKER key to the left simulating a left turn, until the Pointer
is realigned with the vertical line in the Compass Ring. You are now headed
toward the waypoint.
Now that we have now gone through the basic operation of the unit using the
simulator, it is time to do some actual navigation!
To turn off the simulator:
1. With the GPS Information Page displayed, press the MENU key.
2. Select ‘Stop Simulator’ then press the ENTER key.
Initializing the GPS Receiver
Before the GPSMAP 76S can be used for navigation, the receiver has to be
initialized and the compass calibrated.
Take the unit outside where it will have an unobstructed view of the sky and
turn it on. The unit will search for satellite signals and begin to gather and store
the information that it needs to become operational. This process should take
no more than fi ve minutes. When the unit is operational, the message ‘3D GPS
Location’ will be displayed on the GPS Information Page.
If for some reason the unit is not able to gather the necessary satellite informa-
tion, an options page will be displayed. Select ‘New Location’ then ‘Automatic’
and allow the unit to continue initializing. This selection will force the unit to
search for satellites. It may take a little longer for the unit to become operational
using this method.
Initializing the GPSMAP 76S
Turning off the Simulator
Quick Start
190-00249-01_0A.indd 12 9/1/2004, 10:58:40 AM