About nümaps lifetime, Purchasing additional maps, Safety cameras – Garmin zumo 350LM User Manual

Page 20: Custom points of interest, Installing poi loader software, Using the poi loader help files, Finding extras, Purchasing accessories, Troubleshooting, Purchasing accessories troubleshooting

Advertising
background image

About nüMaps Lifetime

Models with "LM" after the model number include subscriptions

to nüMaps Lifetime, which provides quarterly map updates for

the life of your device. For terms and conditions, go to

http://www.garmin.com/numapslifetime

.

NOTE: If your device does not include a subscription to nüMaps

Lifetime, you can purchase one at

http://www.garmin.com

/numapslifetime

.

Purchasing Additional Maps

1

Go to your device product page on the Garmin web site

(

http://www.garmin.com

).

2

Click the Maps tab.

3

Follow the on-screen instructions.

Safety Cameras

NOTICE

Garmin is not responsible for the accuracy of or the

consequences of using a custom point of interest or a safety

camera database.

Safety camera information is available in some locations. Check

http://my.garmin.com

for availability. For these locations, you

can purchase a subscription for safety camera information. The

subscription includes the locations of hundreds of safety

cameras. Your device alerts you when you are approaching a

safety camera and can warn you if you are driving too fast. The

data is updated at least weekly, so you can update your device

regularly to receive the most up-to-date information.
You can purchase a new region or extend an existing

subscription at any time. Each region that you purchase has an

expiration date.

Custom Points of Interest

Custom POIs are customized points on the map. They can

contain alerts that let you know if you are near a designated

point or if you are traveling faster than a specified speed.

Installing POI Loader Software

You can create or download custom POI lists on your computer

and install them on your device using POI Loader software.

1

Go to

http://www.garmin.com/extras

.

2

Click Services > POI Loader.

3

Install the POI Loader onto your computer.

Using the POI Loader Help Files

For more information on the POI loader, refer to the Help file.

With the POI loader open, click Help.

Finding Extras

1

Select Where To? > Categories > Custom POIs.

2

Select a category.

Purchasing Accessories

Go to

http://buy.garmin.com

.

Troubleshooting

Problem

Solution

My device is not
acquiring satellite
signals.

• Verify the GPS simulator is turned off

(

page 14

).

• Take your device out of parking garages and

away from tall buildings and trees.

• Remain stationary for several minutes.

Problem

Solution

The suction cup will
not stay on my
windshield.

1

Clean the suction cup and windshield with
rubbing alcohol.

2

Dry with a clean, dry cloth.

3

Mount the suction cup (

page 2

).

The device does not
charge in my vehicle.

• Check the fuse in the vehicle power cable

(

page 15

).

• Verify the vehicle is turned on and is

supplying power to the power outlet.

• Your device can only charge between 32°F

and 113°F (between 0°C and 45°C).

My battery does not
stay charged for very
long.

To maximize the time between charges, turn
down the backlight (

page 14

).

My battery gauge
does not seem
accurate.

Allow the unit to fully discharge, and fully
charge it (without interrupting the charge cycle).

How do I know my
device is in USB
mass storage mode?

When your device is in USB mass storage
mode, a picture of a device connected to a
computer is shown on the device screen.

The device is
connected to the
computer, but it will
not go into mass
storage mode.

1

Disconnect the USB cable from your
computer.

2

Turn off the device.

3

Plug the USB cable into a USB port on your
computer and into your device.
The device automatically turns on and goes
into USB mass storage mode.

4

Verify your device is connected to a USB port
and not a USB hub.

I cannot see any new
removable drives in
my list of drives.

If you have several network drives mapped on
your computer, Windows can have trouble
assigning drive letters to your device drives.
Refer to your operating system Help file to learn
how to map or assign drive letters.

My phone will not
connect to the
device.

• From the main menu, select Settings >

Bluetooth. The Bluetooth field must be set to
Enabled.

• Turn on your phone and bring it within 33 feet

(10 m) of the device.

Go to

http://www.garmin.com/bluetooth

for

more help.

16

Appendix

Advertising