Garmin nuvi 54LM - Manual (Page 26)

22 Appendix
• Decrease the screen brightness ( page 4 ).
• Do not leave your device in direct sunlight.
• Decrease the volume (
page 4 ).
Changing the Fuse in the Vehicle
Power Cable
Notice
When replacing the fuse, do not lose any of the
small pieces and make sure they are put back
in the proper position. The vehicle power cable
does not work unless it is assembled correctly.
If your device does not charge in your vehicle,
you may need to replace the fuse located at the
tip of the vehicle adapter.
1 Unscrew the end piece.
TIP: You may need to use a coin to remove
the end piece.
2 Remove the end piece, the metal tip, and the
fuse (glass and metal cylinder).
3 Install a 1 A fast-blow fuse.
4 Place the metal tip in the end piece.
5 Screw the end piece back into the vehicle
power cable.
Removing Suction Cup Mount
from the Windshield
Removing the Suction Cup Mount from
the Windshield
1 Flip the lever on the suction cup mount
toward you.
2 Pull the tab on the suction cup toward you.
About nüMaps Lifetime
For a one-time payment, you can receive up
to four map updates each year for the life of
your device. For more information on nüMaps
Lifetime and complete terms and conditions,