Garmin Montana 650t - Manual (Page 4)

4 Montana 600 Series Quick Start Manual
Charging the Lithium-ion Battery
Pack
notice
To prevent corrosion, thoroughly dry
the mini-USB port, the weather cap, and
the surrounding area before charging or
connecting to a computer.
Before you use the device the first time,
fully charge the battery. Charging a
depleted battery takes 4½ hours. The
device will not charge when outside
the temperature range of 32°F to 113°F
(0°C to 45°C).
1. Plug the AC charger into a standard
wall outlet.
2. Pull up the weather cap
➊
from the
mini-USB port
➋
.
➊
➋
3. Plug the small end of the AC charger
into the mini-USB port.
4. Charge the device completely.
removing the Lithium-ion Battery
Pack

warninG
To prevent damage to the battery and
possible injury, do not use a sharp object
to remove batteries.
1. Remove the battery cover.
2. Pull up on the side of the battery that
is closer to the key.
installing aa Batteries
Instead of the lithium-ion battery pack,
you can use alkaline, NiMH, or lithium
batteries. This is especially useful when
you are on the trail and cannot charge
the lithium-ion battery pack. Use NiMH
or lithium batteries for best results.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Insert three AA batteries, observing
polarity.