Garmin GPS 48 - Manual (Page 31)

Labels contain informa-
tion about the navaid.
Labels can be activated
by panning the map cur-
sor to the navaid or by
reaching the selected map
zoom scale
Navaid Setup Page
The navaid setup page lets you select the zoom scale
where navaids become visible on the map. The setup
page is divided into two columns, range and zoom, with
label setup at the bottom of the page. The ‘RANGE’ field
represents the visible range of the navaid, the ‘ZOOM’
field is user–selectable and determines when the navaid
becomes visible on the map.
Navaids become visible on the map at or below the
selected zoom setting.
To change the zoom setting:
1. Highlight ‘NAVAID SETUP’, and press
E
.
2. Select the ‘ZOOM’ field that corresponds with the
navaid visible range, and press
E
.
3. Change to the desired zoom scale and press
E
.
Below the range and zoom fields is label setup. Labels
contain the navaid descriptions and can be set to display
on the map at or below a user–selected zoom scale.
To set the label zoom scale:
1. Highlight ‘NAVAID SETUP’, and press
E
2. Highlight ‘LABEL SETUP’ and press
E
3. Change to the desired zoom scale and press
E
.
27
The Nautical Navaids
can be configured to dis-
play at a user -selected
zoom range by selecting
‘NAVAID SETUP’ on the
map configuration menu.
REFERENCE
Navaid Setup
GPS48revB.qxd 1/7/00 3:12 PM Page 27