Garmin GPSMAP 2006C - Manual (Page 89)

80
Appendix B
Messages
Off Course Alarm— You have exceeded the specified off-course distance.
Proximity Alarm— You have entered the alarm radius for the proximity waypoint indicated.
Proximity Alarm Memory is Full— You have used all ten proximity waypoints.
Proximity Overlaps Another Proximity Waypoint—The alarm radius specified overlaps the area speci-
fied for another proximity waypoint. Adjust distance.
Route Already Exists: <route name>— You have entered a route name that already exists in memory.
Modify route name or delete the previous route name.
Route Is Full— You have attempted to add more than 254 points to a route. Reduce number of points or
create second route.
Route Memory Is Full Can’t Create Route— Maximum amount of 254 routes already in unit memory
and no additional routes can be added until existing ones are removed.
Route Truncated— Uploaded route from other device has more than 254 points or is incomplete.
Running Simulator Real Sonar Requires External Sonar Device— Unit is in simulator (practice) mode.
Shallow Water Alarm — Specified shallow water alarm depth has been detected below the transducer.
Track Already Exists: <track name>— You have entered a saved track name that already exists in
memory. Modify track name or delete the previous track name.
Track Memory Is Full Can’t Create Track— Track log memory is full. No additional track log data can be
stored without deleting old data to create memory space.
Track Truncated— A complete upload track will not fit into memory. The oldest track log points were
deleted to make space for the most recent data.
Transfer Complete— The unit has finished uploading/downloading information to the connected device.
Water Temperature Alarm— Sonar has reported a temperature above, below, inside or outside the
specified value.
Waypoint Already Exists: <waypoint name>— You have entered a waypoint name that already exists in
memory. Modify waypoint name or delete the previous waypoint name.
Waypoint Memory Is Full Can’t Create Waypoint— You have used all 3000 waypoints available. Delete
unwanted waypoints to make space for new entries.