Bosch PTC 1 - Manual (Page 8)

8 | English
1 609 929 W69 | (22.6.11) Bosch Power Tools
Practical Advice
For further questions, please refer to our customer hotline:
Great Britain
Tel: +44 (0844) 736 0107
Australia, New Zealand
Phone: +61 (01300) 307 044
Maintenance and Service
Maintenance and Cleaning
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the tile cutter.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: [email protected]
Problem Cause Corrective Measure
Tile does not break
along the cutting line
Scoring line not continuous from front to end Apply more pressure (uniformly) when scoring the
tiles and score over the complete surface
Tile cutter 1 incorrectly inserted (with PLS 300) Insert tile cutter correctly (see figure C1)
Surface structure of tile uneven
Apply more pressure (uniformly) when scoring and in-
crease the scoring (cutting) speed
Break-off cones incorrectly positioned when
breaking the tile
Position break-off cones below the cutting line and at
the edges of the tile (see figure C3)
For diagonal cuts, position the break-off cones some-
what further toward the inside
Scoring line not continuous from front to end Increase scoring pressure when cutting the tiles
OBJ_BUCH-1220-002.book Page 8 Wednesday, June 22, 2011 9:27 AM