Bosch GWS Professional 24-300 - Manual (Page 23)

English | 23
Bosch Power Tools 3 609 929 B90 | (12.11.09)
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting-off concrete: Vibration emission value
a
h
=8.0 m/s 2 , Uncertainty K=1.5 m/s 2 ,
Cutting-off metal: Vibration emission value
a
h
=8.0 m/s 2 , Uncertainty K=1.5 m/s 2 .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Cut-off Grinder GWS 24-300
Professional
GWS 24-300 J
Professional
Article number 3 601 C64 3.. 3 601 C64 8..
Rated power input W 2400 2400
Output power W 1670 1670
Rated speed min -1 5000 5000
Grinding disc diameter, max. mm 300 300
Thread of grinder spindle M 14 M 14
Thread length (max.) of grinder spindle mm 32 32
Max. cutting depth with cutting guide mm 100 100
Reduced starting current – z
Weight according to EPTA-Procedure 01/2003 kg 10.3 10.3
Protection class /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Only for power tools without reduced starting current: Starting cycles generate brief voltage drops. Interference with
other equipment/machines may occur in case of unfavourable mains system conditions. Malfunctions are not to be
expected for system impedances below 0.25 ohm.
OBJ_BUCH-280-003.book Page 23 Thursday, November 12, 2009 1:21 PM