Bosch GST Professional 140 CE - Manual (Page 13)

English | 13
Bosch Power Tools 2 609 932 855 | (26.11.12)
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 17, page 188).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Connecting the dust extraction 5 180 –181
Adjusting the Cutting Angle 6 181 –182
Mounting the metal overshoe 7 183
Mounting the splinter guard 8 183
Orbital Action Settings 9 184
Adjusting the stroke rate
preselection 10 184 –185
Switching the Power Tool On/Off 11 185 –186
Guide the power tool toward the
workpiece only when switched on 12 186
Switching the worklight On/Off 13 186 –187
Lubrication when cutting metal 14 187
Plunge Cutting 15 187 –188
Selecting Accessories – 190 –191
Action Figure Please observe Page
OBJ_BUCH-1320-004.book Page 13 Monday, November 26, 2012 9:56 AM