Fault finding – Bosch ART EASYTRIM Accu User Manual

Page 16

Advertising
background image

English - 5

The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.

Warning: Switch off and remove battery before investigating fault.

Fault Finding

Symptom

Possible Cause

Remedy

Can not fit Guard over
cutting disc

Incorrect assembly

Remove cutting disc and fit guard, see
also “Product assembly”

Machine fails to operate

Battery discharged

Recharge battery, see also “Charging
advice”

Machine functions
intermittently

Machines internal wiring damaged

On/Off switch defective

Contact Service Agent

Contact Service Agent

Excessive vibration/
noise

Machine fault

Blade broken

Contact Service Agent

Replace blade

Cutting time low on one
battery charge

Battery not used for long period or ini-
tial usage

Grass too high

Battery worn out

Fully charge battery, see also “Charg-
ing advice”

Cut in stages

Replace the battery

Blade will not move

Battery discharged

Machine fault

Recharge battery, see also “Charging
advice”

Contact Service Agent

Machine is not cutting

Blade broken

Battery not fully charged

Grass entangled around cutting disc

Replace blade

Recharge battery, see also “Charging
advice“

Remove grass

No charging procedure
possible due to defective
battery

The contacts of the battery are con-
taminated

The battery is defective, due to a dis-
connection in the battery (individual
cells)

Clean the contacts (e. g. by inserting
and removing the battery several
times) or replace the battery, as re-
quired

Replace the battery

The LED indicator 12
does not light up after
plugging the mains plug
into the socket and insert-
ing the battery into the
charging compartment 11

The charger plug is not inserted (prop-
erly)

Socket, cable or charger are defective

Insert the plug (fully) into the socket

Check the mains voltage and if neces-
sary, have the battery charger
checked by an authorized customer
service station for Bosch power tools

F016 L70 456.book Seite 5 Dienstag, 20. Januar 2009 9:35 09

16 • F 016 L70 456 • TMS • 11.11.08

Advertising