Yamaha PSR-340 - Manual (Page 94)

94
SAVE
You can save User songs (page 79), User One Touch Settings (page 72),
User EZ Chord data (page 66) and Disk Style data (page 91) to floppy
disks.
1
Insert a formatted floppy disk.
2
Press the SAVE button.
Press the SAVE button again to exit from the SAVE screen. • If the SAVE button is
pressed when there is no
floppy disk inserted into the
disk drive, a “No Disk”
message appears at the top
of the display, and all disk
operations will be disabled.
• When the floppy disk’s
write-protect tab is set to
ON ( page 92) or the disk is
a purposely “copy-pro-
tected” disk, a “Protect”
message appears, indicating
that the Save function is not
possible. Select the file to save, if necessary.
Use the +/- buttons.
To overwrite the data already saved to an existing file, use the +/- buttons
to select the file you want to overwrite.
3
If necessary change the file name.
The PSR-340 automatically creates a file name ( for example “UF_00nnn” )
for the file you are about to save. If you want to enter a more descriptive
name for easier file identification (and this is recommended), this can be
done directly from the keyboard.
Even if you chose a file
where data is already saved
because you want to
overwrite the data,
renaming the file will cause
the new data to be saved in
a different file, and the old
data won’t be overwritten.
A file name can consist of up to 8 characters. Each key on the keyboard
enters a different character, printed directly above the key (you cannot
write over the file extension following the period at the end of the file
name). The A#5 and B5 keys move the cursor backward and forward within
the file name. Use these keys to place the cursor where you want to enter
or change a character. The DELETE key (C6) deletes the character at the
cursor position.
DISK OPERATIONS
--- UF_00nnn
USr Filename
92