American Magnetics 160 Liquid Helium Level Superconducting Dipstick - Manual (Page 4)

available from AMI. Replacement sensors are provided with cable
and connector ready to plug into the electronics enclosure.
Calibration or adjustment of the electronics is not required.
VI. TROUBLESHOOTING
1. No level indication:
a. Ensure there is liquid helium in the container being measured.
b. Ensure the toggle switch is placed in the proper position.
c. Ensure the battery has sufficient power by observing the green POWER LED is
illuminated.
d. Ensure there is no ice formation or foreign matter around the sensor.
e. Ensure the connector is properly plugged into the electronics enclosure.
If the cause of the problem can not be found contact an AMI service representative at (865)
482-1056.
VII. WARRANTY
All products manufactured by AMI are warranted to be free of defects in materials and
workmanship and to perform as specified for a period of one year from date of shipment. In
the event of a failure occurring during normal use. AMI, at its option, will repair or replace
all products or components that fail under warranty, and such repair or replacement shall
constitute a fulfillment of all AMI liabilities with respect to its products. Since, however,
AMI does not have control over the installation conditions or the use to which its products
are put, no warranty can be made of fitness for a particular purpose, and AMI cannot be liable
for special or consequential damages. All warranty repairs are F.O.B. Oak Ridge, Tennessee,
USA.
VIII.RETURN AUTHORIZATION
Items to be returned to AMI for repair (warranty or otherwise) require a return authorization
number to ensure your order will receive the proper attention. Please call an AMI
representative at (865) 482-1056 for a return authorization before shipping any item back to
us.
\160\docs\160mn.sam
4
Rev. 4/28/2003