Audiopipe APCL-6002 es - Manual (Page 7)

- 5 -
English
We recommend to have the installation done by an Authorized Audiopipe Dealer.
Required power, ground wire and proper external fuse as below:
We recommend a fuse should be installed away 0.2m from the battery. The ground wire
should be connected directly with the chassis of your vehicle which should be metal to
metal ground point connection. The amplifier must be mounted securely at a solid, dry
and low vibration surface in the trunk or passenger area. Fix the amplifier in an open air
area to insure proper heat dissipation. Fix the amplifier in a place where can access easily
to set the input controllers. Install all amplifier cables as far as possible from car electrical
cables such as the car ignition cable.
Fuse
90 AMP
150 AMP Model
APCL-6002
APCL-6004 Wire
2 Gauge
0 ~ 2 Gauge