Blue Ox SC9012 - Manual

®
®
OverBilt® SportLoader TM
Service Support Stand
Installation Instructions
Page 1 of 2
WARNING:
USE ONLY GENUINE FACTORY REPLACEMENT PARTS.
Do NOT substitute homemade or non-typical parts. This may
cause your support stand to fail and result in injury or death.
If repairs of parts or components of your support stand are
needed, you may order them through your nearest Blue Ox ®
dealer or distributor, or call our 24/7 Customer Care Team at
(402) 385-3051 or toll free at (888) 425-5382.
The SportLoader Service Support Stand is a versatile tool allowing you to service, wash or detail your
motorcycle at a comfortable height. Rather than having to bend over to work on the bike, you simply
place the ramp extensions on the SportLoader, secure the stand under the end and run the bike out of the
pickup. The Service Support Stand secures the SportLoader in the horizontal position, making service or
detailing easy.
Unpacking your SportLoader Service Support Stand
Remove the SportLoader Service Stand from the shipping carton, referencing the parts list below.
Verify you have all of the parts BEFORE you start the installation process. If you do NOT have all the
components, please contact a Blue Ox dealer or distributor. You can also contact a member of Blue Ox’s
24/7 Customer Care Team at (402) 385-3051 or toll free at (888) 425-5382 to order replacement parts.
Parts List
Ref. # Part # Qty. Description
1 61-6181 1 Weldment, Support Stand Base
2 61-6182 1 Weldment, Support Stand Adjustor
3 229-0440 1 Spring Lock Pin, 5/16” x 2 1/2” EF
4 84-0001 1 Quick Pin Assembly
5 229-0520 1 Pin, 1/2” x 2 5/8”
1
2
3
4
5