Blue Ox BX88296 - Manual

BX88296
7/8” Off Road Adapters
Installation Instructions
405-0335 Page 1 of 2 6/19/13
Serial Number
1. Using a 3/4” socket and wrench, remove
the existing 1/2”-13 bolt and 1/2”-13 jam
nut from the tow bar leg. Remove the
existing lug and washers from the tow bar
leg. Do this on both tow bar legs.
2. Install the offset double lug onto the tow
bar leg with the new washers, 1/2”-13 x 2”
bolt and 1/2”-13 jam nut provided. Tighten
the bolt until the lug is tight against the
washers, but can still freely move side to
side. Do this on both tow bar legs.