Blue Ox BX88185 - Manual

®
®
Adapter Kit
BX88185
Installation Instructions
BX88185 Adapter Kit
Th e BX88185 Adapter Kit is designed to adapt Blue Ox® tow bars to Roadmaster brackets which
are equipped with the cross bar already.
CONTENTS:
Qty. Part # Description
2 61-5639 Wldm’t, Adapter, Roadmaster
8 290-0381 Washer, .051 x .523
2 202-0143 1/2-13 Essna jam Nut, ZP
2 202-0645 1/2-13 x 2 Hx Bolt, Shrt Th read
© 2006 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.us
292-2837 Page 1 of 1 04/06
At Blue Ox® we pride ourselves in off ering
exceptional customer service to our valued
customers.
If you have any questions, comments, or
concerns please feel free to contact a member of
our 24/7 Customer Care Team by calling (402)
385-3051 or
toll free at (888)425-5382.
Customer Service Commitment
Blue Ox® is focused on providing exemplary customer service,
as observed in our mission statement and guiding principles. In
accordance with this objective, Blue Ox® is proud to provide services
such as repairs and general maintenance of Blue Ox® products at
over 150 RV Rallies. Look for our Destination America or Blue Ox®
Racing service crews at the next rally or race that you attend. If you
were not present, you will fi nd an informative, personalized note
explaining any services that may have been performed to
your Blue Ox® products.
Blue Ox® also off ers educational seminars at rallies and through our
Parks and Resort teams. In addition, Blue Ox® customers visiting our
factory may take advantage of the well-equipped Blue Ox® RV park
at no charge to you, our valued and appreciated customer.
BLUE OX ®
WARNING:
USE ONLY GENUINE FACTORY REPLACEMENT PARTS.
Do NOT substitute homemade or non-typical parts. This may cause
your adapter kit to fail and result in injury or death. If repairs of parts
or components of your adapter kit are needed, you may order them
through your nearest Blue Ox ® dealer or distributor, or call our 24/7
Customer Care Team at (402) 385-3051 or toll free at (888) 425-5382.
Installation Instructions
1. Remove existing tow bar lug from the leg pivot.
2. Install adapters to the tow bar leg pivots using the
hex bolts, nuts, and washers.
3. To attach the tow bar to the brackets, insert adapters
into the attachment tabs of the bracket. Align the holes
of the adapters with the holes of the brackets and pin in
place using the existing bracket pins.