Cerwin-Vega SDS-525 Manual - Manual (Page 3)

3
SDS-525T speakers are equipped with tilt
brackets for use in wall or ceiling placement.
This feature allows you to quickly and conve-
niently set speaker tilt for optimum sound
d i rectionality after placing the speakers.
T
O
A
D J U S T
T
H E
T
I LT
:
❶ Loosen the screw in the middle of the
s c rew bracket.
❷ Move the bracket up or down to pro v i d e
the desired amount of tilt.
❸ Tighten the scre w.
A
D J U S T I N G
T
H E
S
P E A K E R
T
I LT
The SDS-525T is equipped with an adjustable
bracket to accommodate both wall and ceil-
ing installations. The bracket with the circ u l a r
adapter is intended for ceiling mounting to a
t h readed rod and offers a maximum tilt angle
of 60º. Without the circular adapter, the
bracket can be screwed directly to the wall
with a maximum tilt angle of 45º.
I M P O RTA N T: If you are unsure of how to secure l y
and safely fasten speakers to a wall, please con -
tact a knowledgeable source about the best type of
h a r d w a re for your particular wall's construction.
S e c u re installation is the user's re s p o n s i b i l i t y.
Included bracket is assembled using compo-
nents supplied. Refer to illustration for
assembly pro c e d u res. Please note that the
adapter disc is optional for stud applications.
M
O U N T I N G
A S
P E A K E R
B
R A C K E T
A
S S E M B LY
CERWIN-VEGA SDS-525T STRUCTURAL DESIGN SERIES
SDS-525t_Manual_V3.qxd 9/20/04 11:22 AM Page 3