Concord SPIN INSTRUCTION MANUAL - Manual (Page 6)

22 23
_ USING THE FOOTREST
Pull the footrest ( 05 ) to the right as far as
it will go and fold it down until the footrest
moves to the left and is firmly secured.
To fold the footrest in, move it to the right
as far as it will go. Then fold the footrest
up until it moves to the left and is firmly
secured.
_ ADJUSTING THE CONCORD SPIN SEAT HEIGHT
The CONCORD SPIN can be adjusted to four different heights.
The CONCORD SPIN‘s footrest is located under the seat.
To lower the CONCORD SPIN, press the locking buttons ( 06 ) on both
sides of each leg and guide the upper part of the leg downwards.
Check that the number of holes visible on the front and back leg of the
CONCORD SPIN is identical to ensure that the seat is horizontal.
To raise the seat of the CONCORD SPIN,
place your foot on the crosspiece of the
leg, press the locking buttons (
06 ) on both
sides of each leg and move the top part
of the leg upwards. Make sure that the
number of holes that are visible on the front
and back legs of the CONCORD SPIN is
identical to ensure that the seat is level.