EVS GX Version 1.00 - February 2011 User’s Manual - Manual (Page 55)

GX server – Version 1.0 – User’s Manual
EVS Broadcast Equipment – February 2011
Issue 1.0.C
49
5.5.5 V
IDEO
S
ETTINGS IN THE
E
DIT
GX C
LIPS
W
INDOW
Note about the examples
The frame rate used in the examples below is 50i (25 f/sec).
The schemas in the examples show the field values as defined on the
raw materials, and the corresponding TC values of the GX clip that will
be displayed to external controllers.
(V
IDEO
) O
UT
F
IELD
The video OUT field gives the timecode, on the video raw material, at which the
GX clip should end.
The reference timecode (00:00:00:00) corresponds to the beginning of the video
raw material.
Example
In this example, the video raw material used for the GX clip is 2 seconds. The IN
field is 00:00:00:10. The video OUT point defined for the GX clip is on TC
00:00:01:20 of the corresponding raw material.
This means the video track of the GX clip will be played out from TC 00:00:00:10
up to TC 00:00:01:20 of the video raw material.
GX Clip Video OUT
00:00:01:09
Video Raw Material
00:00:00:00
00:00:00:05
00:00:00:10
00:00:00:15
00:00:00:20
00:00:01:00 00:00:02:00 00:00:03:00
GX Clip IN
00:00:00:00
GX Clip OUT
00:00:02:14
Audio Raw Material
GX Clip GX Clip Playout
00:00:01:20
OUT FIELD
(Video)