Recording mode area, Status area – EVS XEDIO Ingest Organizer Version 3.1 - January 2011 User Manual User Manual
Page 12
Xedio Suite Version 3.1 - User’s Manual – Ingest Organizer
EVS Broadcast Equipment – January 2011
Issue 3.1.B
7
R
ECORDING
M
ODE
A
REA
The recording on an encoder from Xedio Ingest Organizer can be started in one of
the three following modes:
•
Manual: when you press the Start Record button, a dialog box allows you to
enter a record duration. The encoding process starts as soon as you press the
Start with Limits button.
•
On Trigger: you can enter a start timecode and a stop timecode. The encoding
process will start and stop at the specified timecodes.
•
On Time: you can enter start and stop times and dates for the encoding
process. This option is dimmed when the scheduler interface is available.
S
TATUS
A
REA
The Server status shows if the Xedio Ingest Organizer application is connected by
IP to the corresponding Xedio Ingest Server.
The High and Low Bit rate status show if Xedio Ingest Organizer is
communicating with the encoder software for the specified encoder. Ready is
displayed when the encoder is ready for the recording. During the recording
process, Rec is displayed.
The Connect button allows the user to make the connection manually if the status
currently shows a disconnection.