EVS XT3 MulticamLSM Version 11.01 - November 2012 Operation Manual - Manual (Page 57)

Multicam - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.D
47
Press MENU to access the secondary menu. If no keyword file is selected in the setup,
the LCD display will be:
In this mode of the secondary menu, clips can still be directly recalled using the F1-F10
keys of the Remote Panel.
If a keyword file is selected in the setup, the LCD display will be:
In this mode of the secondary menu, the
F1-F10 keys are used for keyword assignment,
and thus can no longer be used to recall clips. For a description of the keyword-related
functions, please refer to the “Keyword Management” Section of this manual.
The ID of the current clip appears on the end of line 3 of the LCD display.
Push
Introduction
The Push function allows you to easily send a copy of a clip to another machine on the
network, either via the GigE network or the SDTI network.
Principle
• If one or two default targets (push machines) are defined in the setup, the clip will be
automatically sent to these machines.
• If no default target is defined, the list of machines available on the network will
appear. As soon as the operator selects one of them, the clip is pushed.
Depending on the push settings defined, the default targets or the list of possible targets
submitted to you will contain EVS servers on the SDTI network and/or EVS servers on
the GigE network.
1keyword890123 2 keyword89012 3 keyword89012
111A
Push Aux Clip Sort->TC Post-Roll
>Archive *** Cam
1 keyword890123 2 keyword89012 3 keyword89012
F1:action_1 F6:action_6
F2:action_2 F7:action_7 111A
F3:action_3 F8:action_8
F4:action_4 F9: p.01
F5:action_5 F0:Next page
Push Aux Clip Sort->TC Post-Roll
>Archive *** Name Cam