Resetting the volume, How to reset the volume on an track, How to reset the volume on a part of a track – EVS IPDirector Version 6.2 - June 2013 IPEDIT User Manual User Manual
Page 209
Advertising
During
After
6.14.10. Resetting the Volume
How to Reset the Volume on an Track
To reset the volume on the whole track loaded, proceed as follows:
•
In the Volume Automation panel, right-click and select Reset track automation
volume.
The volume of the whole track is reset to its initial volume.
How to Reset the Volume on a Part of a Track
To reset the volume on a part of the track loaded, proceed as follows:
1. In the Volume Automation panel, delimit the part of the track on which you want to
reset the volume as follows:
a. Add a mark IN point at the position to start the volume reset.
b. Add a mark OUT point at the position to stop the volume reset.
IPDirector - Version 6.2 - User Manual - IPEdit
6. Timeline
197
Advertising