EVS IP2Archive Deep Archive Manager Version 3.0 - October 2012 User Manual - Manual (Page 98)

The system administrator also has to define the name of the DIVArchive Manager, the
default tape set ID, and the tape type. This will be the properties of a newly added tape.
How to Add a Single Tape ID
To add a single tape ID, proceed as follows:
1. Click the Add button.
• If tape set ID 0 is selected, a warning message appears. This is because normally no
tapes are assigned to tape set 0.
Click No to abort the operation and select a different tape set ID first.
• If tape set ID 0 is not selected, or if you click Yes, the Add Tapes dialog box appears.
2. Select the Single Tape radio button.
3. Enter the tape ID.
4. Click Add to add the tape ID to the list of tape IDs or Cancel to cancel the operation.
IP2Archive - User Manual - Deep Archive Manager Version 3.0
6. Configuring the Application 91