6 assign button, How to assign keywords to one or several clips, 7 refresh button – EVS IPDirector Version 5.9 - January 2011 Part 3 User’s Manual User Manual
Page 23: 8 saved filters button, Assign button, Refresh button, Saved filters button
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – January 2011
10
2.3.6 A
SSIGN
B
UTTON
The Assign button is used to assign keywords to one or several clips. It can be
activated in Clip, Clip element or bins/clips branches of the Database Explorer.
H
OW TO
A
SSIGN
K
EYWORDS TO
O
NE OR
S
EVERAL
C
LIPS
To assign keywords to one or several clips, proceed as follows:
1.
Select a clip or clip element in Clip, Clip element or bins/clips branches of
the Database Explorer grid.
2.
Click the Assign button. It becomes colored to indicate that the Assign
mode is active.
3.
Open a keyword grid or a keyword dictionary.
The Apply button must be active (colored) in the keyword grid or dictionary.
Refer to Keyword Management chapter in part 2 of this manual.
4.
Select the keywords you want to assign to the media.
5.
Click the Apply button.
Keywords are assigned to the clip or clip element and appeared in Keywords
columns of the Database Explorer grid.
2.3.7 R
EFRESH
B
UTTON
This performs a manual refresh of the element grid.
2.3.8 S
AVED
F
ILTERS
B
UTTON
The Saved Filters mode can be activated by clicking the Saved Filters button.
Then, the button becomes colored and the Saved Filters pane is displayed at the
bottom of the window.