Clip capacity, Rec auto start – EVS XT3 Version 11.01 - November 2012 Configuration Manual User Manual
Page 134
Clip Capacity
Description
Recording mode on the record channels.
Values
The following values are available: Global / Per channel
•
Global:
In this mode, the clip capacity is shared between the
different record trains.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 10 min of recording capacity
equally from each record train.
•
Per channel:
In this mode, the clip capacity is only relevant to the
individual record train.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 30 min of recording capacity
from the 1
st
record train, but will not affect the recording
capacity of the other two record trains.
Default value
The default value depends on the base configuration:
•
Global (locked):
◦
in LSM configurations
◦
in Video delay configurations
◦
in Spotbox configurations
•
Per channel:
◦
with 2-ch VTR
◦
in Server configurations
Rec Auto Start
Availability
This setting is displayed when a Spotbox or Server
configuration is running.
Description
Automatic start of the record channels after the EVS server
has initialized.
Values
Yes (default) / No
XT3 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
124