EVS GX Version 1.10 User’s Manual - Manual (Page 63)

GX server – Version 1.10 – User Manual
EVS Broadcast Equipment – September 2012
Issue
1.10.D
55
5.5.5 Video Settings in the Edit GX Clips
Window
Note about the examples
The frame rate used in the examples below is 50i (25 f/sec).
The schemas in the examples show the field values as defined on the raw
materials, and the corresponding TC values of the GX clip that will be displayed
to external controllers.
(Video) Out Field
The video OUT field gives the timecode, on the video raw material, at which the GX clip
should end.
The reference timecode (00:00:00:00) corresponds to the beginning of the video raw
material.
Example
In this example, the video raw material used for the GX clip is 2 seconds. The IN field is
00:00:00:10. The video OUT point defined for the GX clip is on TC 00:00:01:20 of the
corresponding raw material.
This means the video track of the GX clip will be played out from TC 00:00:00:10 up to
TC 00:00:01:20 of the video raw material.