EVS MulticamLSM Version 10.03 - July 2010 Configuration Manual - Manual (Page 11)

Issue
10.03.C EVS Multicam – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
4
Setup page and section
name Content
on page 26.
Page 6
See section 2.8 ‘HCTX
Gigabit Connection Settings
(Page 6)’, on page 29 and 2.9
‘LAN Connection Settings
(Page 6)’, on page 30.
It includes detailed settings on:
the HCTX gigabit connection
the MTPC board connection
Page 7
See section 2.10 ‘Sony
BVW75 Settings (Page 7)’, on
page 32.
It includes the settings used with the Sony BVW
protocol.
Page 8/9
See section 2.11
‘
EditRec Settings (Page 8/9)’,
on page 34.
It includes the settings used with the EditRec
application.
Page 10
See section 2.12 ‘
Multiviewer Settings (Page
10)’, on page 38.
It includes the settings for the connection of an
external multiviewer.
2.1.2 H
OW TO
A
CCESS THE
S
ETUP
C
ONFIGURATION
The Setup Configuration module is available by pressing simultaneously SHIFT-F2
on the keyboard with CAPS LOCK disabled. The Setup Configuration is not
accessible if CAPS LOCK is ON.
2.1.3 H
OW TO
M
OVE
I
NSIDE THE
S
ETUP
C
ONFIGURATION
• Use <TAB> / SHIFT-<TAB> to move from one parameter to the next/previous,
and the ←/→ arrow keys to change the value of a parameter.
• Use Page Up / Page Down to access the other configuration screens.