EVS Xfile Version 2.02 - February 2009 User Manual - Manual (Page 153)

Issue 2.02 D XFile Version 2.02 – User Manual
EVS Broadcast Equipment – February 2009
152
Field / Button Description
XT Number and Name Displays the XT[2] number and XT[2] name of the
selected XT[2] server. This is a read-only field.
Recorder channel Allows (de)selecting the recorder channels of the
specified XT[2] server of which the record trains
will be backed up.
By default, all recorder channels available in the
given XT[2] configuration are deselected and
displayed on a pale green background.
Click the corresponding letter to select a camera.
The selected cameras are displayed on a bright
green background.
In QuickStart mode, it is not possible to back up
more record trains than the number of channels
assigned to the XStream. If the user attempts to
do this, the following error message will be
displayed on the QuickStart window:
Setup button Gives access to the QuickStart Setup window.
For more information, see section ‘Setup in
QuickStart Mode’, on page 153
Record button Starts the backup of the record trains on the
selected channels. The backup record starts
instantly.
Stop button Stops the backup of the record trains on the
selected channels. The backup record will be
stopped when the user presses the Stop button.
As the backup files need to close properly, it can
however take some time before the job is
finalized. During this time, the message
“Finalizing …” will be displayed in the QuickStart
dialog box.