EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 34)

XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
33
Autobackup mode
Press to activate the Autobackup Mode. In this mode, the
system acts automatically and backs up all clips according to the criteria
defined in the Autobackup selection window. Besides, this mode is
important to take account of the different updates made during operations.
Note: This mode MUST be enabled for the user's >ARCHIVE
commands from the Multicam systems to be taken into account.
After the start-up, the system automatically starts two operations: the
scanning disk process and the Scanning Network process.
Those operations might last a few seconds depending on the number of
clips present on disk and the number of clips present on the XNet.