EVS XTAccess Version 1.17 - May 2012 User Manual - Manual (Page 24)

Issue 1.17.C XTAccess Version 1.17 – User Manual
EVS Broadcast Equipment – May 2012
16
Graphical Settings
These settings relate to the generation of files/clips from a picture (BMP, TIFF & TGA
formats) or audio (Wav, BWav).
Command name Description
Video System Select either Pal or NTSC, in progressive or not.
Sequence TimeCode Enter the value of the first TC included in the destination file/clip.
Fill & Key encoding Check this option if you want to generate two synchronous
files/clips based on Alpha Channel: one file/clip with the Fill
sequence and one file/clip with the Key sequence.
Add Audio when
encoding Graphical
Sequence Check this option if you want to add audio to the sequence
created with your graphic files.
The audio files must be 16-bit audio files of 48 kHz (1 to 8
channels). The file format must be Broadcast Wave
Uncompressed (BWAVE) (.wav).
Sequence Duration Type the duration (only valid for pictures, not for animated
sequences).
Default Audio
Bitmap Select the default picture you want to add to your audio
encoding. The EVS server does not support audio only so you
have to add a graphic picture.
Some default pictures are available in the XTAccess folder
C:\Program Files\EVS Broadcast
Equipment\XTAccess\Default Picture Files\