EVS Xedio Dispatcher Version 3.1 - December 2010 User Manual - Manual (Page 59)

Issue 3.1.B Xedio Dispatcher – Version 3.1 – User’s Manual
EVS Broadcast Equipment – December 2010
5.5 ADDING LOGS TO A CLIP
5.5.1 I
NTRODUCTION
Whenever you want, you can add logs to the material loaded in the Clip Player, or
in the Storyboard Player. Even if you add the log in the Storyboard Player, the
logs are in fact added to the source clip. You can associate a ranking and/or
keywords to the log.
5.5.2 H
OW TO
A
DD A
L
OG TO A
C
LIP
The following procedure explains how to add logs, with associated metadata.
If you want to add a cue point (no associated metadata), simply click the Add Log
button
after step 2.
To add a log to a clip, proceed as follows:
1. Load the source clip in the Clip Player or the storyboard clip in the Storyboard
Player. For more information, see the sections 4.8.2 and 4.8.3.
2. Position the nowline on the frame where you want to add a log in one of the
following ways:
o
Using the transport buttons
o
Dragging the nowline to the requested frame
o
Typing the requested TC in the nowline TC field (in Clip Player only) and
pressing ENTER.
3. Click the Logger tab in the Tools area.
4. Click within the Keyword Grid Selection field.
The list of available keyword grids is displayed:
5. Select the keyword grid you want to use.
6. Click the keywords you want to associate to your log, and/or the requested
ranking button.
A log is added to the media bar.
52