EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual - Manual (Page 32)

IP Director Version 4.4 – User Manual – Part 2: Logging and Browsing
EVS Broadcast Equipment – March 2008
Issue 4.4.C
19
1.6 CREATING EVENTS ON A LOG SHEET
1.6.1 H
OW TO
L
OG
LIVE A
CTION IN AN
E
VENT
To create a new log entry in a loaded log sheet, proceed as follows:
1. In IP Logger, select the New button in the LIVE area:
The Create a New Log window opens with the timecode grabbed from the
preview recorder:
For more information on the fields, see section 1.6.2.
2. If required, use the upper text field to enter free text into the log.
3. If required, add keywords to the log entry.
See section 1.6.3.
4. If required, select a rating level.
5. Click the Insert button.
The log entry is created in the log sheet. The log entry contains a column for each
user fields and each automatic keyword fields defined in the associated logging
profile, even if no value has been defined for the fields.
Any clip made on the relevant record channels of the XNet will appear on the log
in the Associated Clips column. And this irrespective of when the clips are
created, even if this is significantly before or after the grabbed timecode. The log
will automatically update whenever it sees a clip containing the recorded event
timecode.
1.6.2 F
IELDS IN THE
C
REATE A
N
EW
L
OG
W
INDOW
The following table describes the fields available in the Create a New Log window:
Field Description
Level Rating A rating can be given to an event from no stars to
***.
Description To add alphanumeric free text from the keyboard.
Keyword Up to 10 keywords can be added per event, to
enter click on a keyword from any open grid, each
mouse click adds a keyword, to deselect a
keyword, click on it again.