EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 91)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
82
H
OW TO
E
DIT A
C
LIP
(TC IN/OUT)
To modify the TC IN and/or the TC OUT of a recorded clip, proceed as follows:
1. Load the clip on a player channel as explained in section 5.4.3 ‘Loading
Media’ on page 68.
2.
Tap the Edit Clip TC button .
It becomes active and its background color turns blue .
In and Out additional buttons appear at the bottom of the Review tab:
3. To edit the IN point, move through the clip until you find the position you
want to mark as new IN point.
The TC Current field reflects the actual position of the cursor, after moving.
4.
When the cursor is on the selected timecode, tap the In button .
The modified IN point is displayed in the TC IN field and both TC IN and
Duration fields are surrounded by a blue line.
5. To edit the OUT point, move through the clip until you find the position you
want to mark as new OUT point.
The TC Current field reflects the actual position of the cursor, after moving.
6.
When the cursor is on the selected timecode, tap the Out button .
The modified OUT point is displayed in the TC OUT field and this field is
surrounded by a blue line.
7.
Tap the Edit Clip TC button to save the changes.
A dialog box opens and asks whether you want to apply the changes. Note
that changes will be applied to all the clips of the take.
8.
Tap .
All the clips of the take not yet transferred are updated or new clips are created
for the take already transferred.