EVS IPDirector Version 6.0 - November 2012 Part 8 User's Manual - Manual (Page 124)

6.6. Deleting Elements from the Timeline
6.6.1. Introduction
The elements of a timeline are said to be 'lifted' when they are deleted from the timeline in
Overwrite mode.
The elements of a timeline are said to be 'extracted' when they are deleted from the
timeline in Insert mode.
6.6.2. Lifting Timeline Elements or Parts of a
Timeline
Principle
When you delete timeline elements or a part of a timeline in Overwrite mode, i.e. lift them,
a blank element will be left at the position where each element or the part of the timeline
has been deleted.
How to Lift Elements from a Timeline
First Method
To lift elements in Overwrite mode, you can proceed as follows:
1. Toggle to the button by clicking the Insert/Overwrite Global Mode button.
2. Select the elements of the timeline to be lifted by clicking or lassoing them. See
section "Selecting and Deselecting Timeline Elements" on page 90 for more
information.
3. Press .
The selected elements are deleted and replaced by blank elements.
Second Method
To lift elements from a timeline in Overwrite mode, you can proceed as follows:
1. Select the elements of the timeline to be lifted by clicking or lassoing them. See
section "Selecting and Deselecting Timeline Elements" on page 90 for more
information.
2. Press .
112 6. Timeline
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A