EVS IPDirector Version 6.2 - June 2013 RECORDER PANEL User Manual - Manual (Page 12)

Area Description / See also…
4. Current
Timecode
field This field displays the incoming timecode of the server (should be
the studio time). When the recorder is started, the timecode is
running.
See section "Timecode Fields Display" on page 6.
5. Remaining
Capacity
control This read-only field displays the remaining capacity on this specific
recorder channel on the EVS video server.
6. Start
Record and
Stop
Record
buttons These buttons are used to start or stop the recording from a
recorder channel of an EVS video server.
See section "Start Record and Stop Record Buttons" on page 4.
2.2.2. Recorder Contextual Menu
A contextual menu appears when you right-click the Recorder Channel field.
The following table describes the commands available from the contextual menu.
Menu Item Description
None Removes the association between the Recorder Panel and
the recorder.
[List of recorder
channels from
available EVS video
servers] Provides the list of recorder channels available on the XNet
network, and visible to the current user, which can be
assigned to the Recorder Panel.
See section "Assigning a Recorder Channel" on page 7.
2.2.3. Start Record and Stop Record Buttons
The following table gives the meaning of each recording operation. A button and/or a
keyboard shortcut can be used to perform each action.
4 2. User Interface
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A