EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 19)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
10
Go to Element Timecode Button
OR
Clicking this button displays or hides the Go To Timecode zone.
The user may enter a timecode between the TC IN and TC OUT of the selected
clip element and the system will cue to the timecode inside the element.
Time Until Transition
The ‘Times until transition’ information is the remaining time till the next element
starts.
It is calculated taking into account the current speed.
Time Until Next Break
The ‘Time until next break’ information is the emaining time till the next break in
the playlist. If the playlist has no break, the remaining time till the end of the
playlist is displayed.
It is also calculated taking into account the current speed, and the transition
information (effect duration and playlist elements speed). If the speed is unknown,
the speed of the previous element will be used to calculate the value, if this is
also unknown, then the previous element speed must be used etc,).
Note
If the Playlist has a LOOP defined in the middle, the time until next break
may not display a value due to the type of LOOP in use.